Basic Patching for Soundboard

Default file has keys, pads, and acoustic guitar patched in. See below for plugging in a guitar for the default file.

Patching

1. On the wing press the home button to the left of the screen, then press the square box under “INPUT”
2. On the right ensure “AES50 A” is selected from the dropdown
3. The inputs listed correspond to the inputs labeled on stage in the stage pockets
4. If the input should be in stereo press the “ST” on the top right, if only one input, press the “M” on the top right
5. Press “CLOSE” on the top right to close the input selector
6. On the bottom left use the gain to set the input level, level should be turned up high enough to sound at a good level with the fader at unity (0)
7. If it shows red and clipping that is too loud and needs to be turned down, ideal level is -18